CS2 to TF2 sensitivity converter
Enter your Counter-Strike 2 sensitivity and DPI to get the Team Fortress 2 sens that turns the exact same distance. To convert by hand, use the same number: CS2 and TF2 sensitivity are 1:1.
Formula
CS2 to TF2 formula
TF2 sens = CS2 sens × 1Counter-Strike 2 turns 0.022° per mouse count at sensitivity 1; Team Fortress 2 turns 0.022°. The ratio of the two, 0.022 ÷ 0.022, is the multiplier. It holds at any DPI as long as you use the same DPI in both games.
Chart
CS2 to TF2 sens chart
At 800 DPI in both games.
| CS2 sens | TF2 sens | cm / 360° | eDPI (CS2) |
|---|---|---|---|
| 0.8 | 0.8 | 64.9 | 640 |
| 1 | 1 | 52 | 800 |
| 1.2 | 1.2 | 43.3 | 960 |
| 1.5 | 1.5 | 34.6 | 1200 |
| 1.8 | 1.8 | 28.9 | 1440 |
| 2 | 2 | 26 | 1600 |
| 2.5 | 2.5 | 20.8 | 2000 |
| 3 | 3 | 17.3 | 2400 |
Converting from
Sensitivity in Counter-Strike 2
Also applies to CS:GO
Counter-Strike 2 keeps the classic Source yaw of 0.022° per count (the m_yaw value), which is why its numbers carry over to Apex and TF2 unchanged. Raw input is always on, the field of view is fixed, and scoped speed is set separately with zoom_sensitivity_ratio.
- Where to set it
- Settings → Keyboard / Mouse → Mouse Sensitivity, or
sensitivityin the console - Common range
- 0.8–1.5 at 800 DPI (35–65 cm/360°)
Converting to
Sensitivity in Team Fortress 2
Team Fortress 2 runs on the original Source engine with the classic 0.022° yaw shared by CS2 and Apex. Set m_rawinput 1 to bypass Windows pointer settings; fov_desired (up to 90) changes how fast things look on screen but not your 360° distance.
- Where to set it
- Options → Mouse → Mouse sensitivity, or
sensitivityin the console - Common range
- 1.5–3.5 at 800 DPI (15–35 cm/360°)
Ranges compared
Where CS2 players land in TF2
Competitive CS2 players mostly use 0.8–1.5 at 800 DPI, which converts to TF2 0.8–1.5. TF2 players typically sit at 1.5–3.5, so most CS2 players land on the slow side in TF2. Plenty keep it that way: your muscle memory matters more than matching everyone else.
FAQ
CS2 to TF2 sens questions
How do I convert CS2 sens to TF2?
You don’t need to: at the same DPI, Counter-Strike 2 and Team Fortress 2 use the same yaw (0.022° per count), so your CS2 sensitivity carries over unchanged. If you use a different DPI, enter both in the converter above.
What is CS2 1.2 in TF2?
CS2 1.2 at 800 DPI is TF2 1.2 at 800 DPI (exactly 1.2). Both need 43.3 cm of mouse movement for a full 360° turn.
Is CS2 sensitivity the same as TF2?
Yes. Both games turn 0.022° per mouse count at sensitivity 1, so the same number turns the same distance.
Where do I change sensitivity in Team Fortress 2?
Options → Mouse → Mouse sensitivity, or sensitivity in the console.
Why does TF2 feel different at the converted sens?
The converted value matches your 360° distance exactly, but CS2 and TF2 use different fields of view and camera setups, so targets can appear to move at a different speed on screen. Make sure mouse acceleration is off in both games and in Windows, then give it a few sessions before tweaking.
More conversions